Shop

ROTARY HUB SEALS

TA

Description

Spring loaded double lip Parker oil seals are used for oil or grease retention and light dust and fluid exclusion. Various OD case designs available to suit application. * None

Application

None

Materials

Fluorinated Rubber (FKM) + Nitrile Rubber (NBR)

MAIN PUMP KIT

TADANO

Description

The IDI is a U-Ring type single acting rod seal with asymmetrical rubber lips.

Application

Mobile machinery Machine tools Presses Standard cylinders

Materials

Iron rubber ( Polyurethane elastomer)

CRANE

TANADO

Description

The IDI is a U-Ring type single acting rod seal with asymmetrical rubber lips.

Application

Mobile machinery Machine tools Presses Standard cylinders

Materials

Iron rubber ( Polyurethane elastomer)

STANDARD (NOK) SEALS

TB

Description

None

Application

None

Materials

Polyacrylate (ACM) + Fluorinated Rubber (FKM) + Nitrile Butadiene Rubber (NBR) + Silicone Rubber: Methyl Vinyl Polysiloxane (VMQ)

TIMING OIL SEAL

TB2

Description

The TB2 profile is a shaft seal composed of a single external metal cage, a primary sealing lip with integrated spring and an additional anti-pollution sealing lip. * Good radial rigidity, particularly for large diameters * Good stability when assembled, preventing the bounce-back effect * Sealing for low and high viscosity fluids * Modern primary sealing lip with low radial forces * Protection against undesirable air contaminants

Application

Shaft sealing Motors Pumps Transmissions

Materials

Rubber

ACM 70 - 75 Shore A EPDM 70 - 75 Shore A FKM 70 - 75 Shore A HNBR 70 - 75 Shore A NBR 70 - 75 Shore A

Metal cage

Steel - AISI 1010 Stainless steel - AISI 304 Stainless steel - AISI 316

Spring

Steel - AISI 1070 - 1090 Stainless steel - AISI 316

FLANGED SHAFT SEALS - TYPE 9

TB9

Description

The TB9 profile is a shaft seal composed of a single external metal cage with an internal rubber coating, a primary sealing lip with an integrated spring and three additional radial and axial anti-pollution lips. * Good radial rigidity, particularly for large diameters * Good stability when assembled, preventing the bounce-back effect * Sealing for low and high viscosity fluids * Modern primary sealing lip with low radial forces * Protection against undesirable air contaminants

Application

All types of rotative applications Machine tools Agriculture Construction Transmission Gear boxes Motors Pumps

Materials

Rubber ACM 70 - 75 Shore A EPDM 70 - 75 Shore A FKM 70 - 75 Shore A HNBR 70 - 75 Shore A NBR 70 - 75 Shore A Metal cage Steel - AISI 1010 Stainless steel - AISI 304 Stainless steel - AISI 316 Spring Steel - AISI 1070 - 1090 Stainless steel - AISI 316

ROTARY HUB SEALS

TBP

Description

The design of the most commonly used GAMMA Seal TBP /RB is based on many years of experience in such applications. The total axial force of the sealing lip is given by elastomer pre­stretching together with lip deformation force which depends on the elasticity of the rubber material, geometry of the sealing lip and assembly positioning against the counter-face. The metal shell is protecting the seal from solids and contributes to exclude other pollution media by centrifusion, allowing a good drainage after immersion in liquids. * Good dynamic sealing * Very good protection against solid pollution particles * Modern lip design provides low axial forces (low power loss) * Small fitting width * No supplementary retention's needed

Application

Transmission systems (e.g. gearboxes) Pumps Electrical motors Machine tools Wheels and heavy-duty axles

Materials

Fluorinated Rubber (FKM) + Nitrile Rubber (NBR)