O-RING/X-RING
HNBR O-RING
Description
HNBR has been developed to meet higher temperatures than standard NBR while retaining resistance to petroleum based oils. Obtained by hydrogenating the nitrile copolymer, HNBR fills the gap left between NBR, EPDM and FKM elastomers where high temperature conditions require high tensile strength while maintaining excellent resistance to motor oils, sour gas, amine/oil mixtures, oxidized fuels, and lubricating oils.Application
Water and steam up to 300 degrees Fahrenheit Fuel systems Oil resistant and high abrasion applicationsMaterials
Nitrile Rubber (NBR) + Ethylene Propylene Diene Monomer Rubber (EPDM) + Fluorinated Rubber (FKM)TIMING OIL SEAL
HSC9Y
Description
The IDI is a U-Ring type single acting rod seal with asymmetrical rubber lips.Application
Mobile machinery Machine tools Presses Standard cylindersMaterials
Iron rubber ( Polyurethane elastomer)TIMING OIL SEAL
HTBY
Description
The IDI is a U-Ring type single acting rod seal with asymmetrical rubber lips.Application
Mobile machinery Machine tools Presses Standard cylindersMaterials
Iron rubber ( Polyurethane elastomer)FLANGED SHAFT SEALS - TYPE 5
HTC5
Description
The TC5 profile is a shaft seal composed of a staggered metal cage with a rubber coating, external stop, primary sealing lip with an integrated spring and an additional anti-pollution lip. * Very good static sealing * Very good thermal expansion * Compensation * Precise positioning when stopped * Greater roughness is * allowed in the housing * Reduced risk of corrosion * Sealing for low and high viscosity fluids * Modern primary sealing lip * with low radial forces * Protection against undesirable * Air contaminantsApplication
All types of rotative applications Machine tools Agriculture Construction Transmissions Gear boxes Motors PumpsMaterials
ACM 70 - 75 Shore A EPDM 70 - 75 Shore A FKM 70 - 75 Shore A HNBR 70 - 75 Shore A NBR 70 - 75 Shore A Metal cage Steel - AISI 1010 Spring Steel - AISI 1070 - 1090 Stainless steel - AISI 316FLANGED SHAFT SEALS - TYPE 9
HTC9
Description
The TC9 profile is a shaft seal composed of a single metal cage with a rubber coating, a primary sealing lip with an integrated spring and three additional radial and axial anti-pollution sealing lips. * Very good static sealing * Very good thermal expansion compensation * Greater roughness is allowed in the housing * Reduced risk of corrosion * Sealing for low and high viscosity fluids * Modern primary sealing lip with low radial forces * Protection against undesirable air contaminantsApplication
All types of rotative applications Machine tools Agriculture Construction Transmission Gear boxes Motors PumpsMaterials
Rubber
ACM 70 - 75 Shore A
EPDM 70 - 75 Shore A
FKM 70 - 75 Shore A
HNBR 70 - 75 Shore A
NBR 70 - 75 Shore A
Metal cage
Steel - AISI 1010
Spring
Steel - AISI 1070 - 1090
Stainless steel - AISI 316