TCZ

Description

None

* None

Application

None

Materials

Fluorinated Rubber (FKM) + Nitrile Rubber (NBR)

TECHNICAL DATA

TECHNICAL DATA

Temperature None -35°C/+90°C
Pressure None 50 MPa
Speed None 0.5 m/s
Medias None Mineral hydraulic oils

MATERIALS

FKM

Depending on their structure and fluorine content, the chemical resistance and resistance to the cold in fluororubbers can vary. This FKM-based rubber is very often used for high-temperature hydraulics and pneumatics, for industrial valves, injection/fuel systems, motor seals and high-vacuum systems.

Chemical resistance Mineral oils and greases, ASTM n°1, IRM 902 and IRM 903 oils.
Fire-resistant liquids (HFD)
Silicone oils and greases
Mineral and vegetable oils and greases
Aliphatic hydrocarbons (propane, butane, petroleum)
Aromatic hydrocarbons (benzene, toluene)
Chlorinated hydrocarbons (trichlorethylene)
Fuel (including high alcohol content)
Atmospheric and ozone agents
Compatibility issue Glycol-based brake fluids.
Ammonia gas.
Organic acids with a low molecular weight (formic and acetic acids)
Temperature range -20°C / +200°C (short-term peak at +230°C)
-40°C / +200°C with particular FKMs

NBR

Nitrile rubber (NBR) is the general term for acrylonitrile-butadiene copolymer. The ACN content can vary between 18% and 50%. While the acrylonitrile content is important, the resistance to oil and fuel is more so. Conversely, the elasticity and compression set are not as good. The NBR has good mechanical properties and good wear resistance. However, its resistance to atmospheric agents and the ozone is relatively low.

Chemical resistance Aliphatic hydrocarbons (propane, butane, petroleum, diesel fuel)
Mineral oils and greases
Fire-resistant fluids (HFA, HFB and HFC)
Diluted acids, low-temperature alkaline and saline solutions
Water (up to +100°C max)
Compatibility issue Fuels with high aromatic content
Aromatic hydrocarbons (benzene)
Chlorinated hydrocarbons (trichlorethylene)
Polar solvents (ketone, acetone, acetic acid, ethylene-ester)
Strong acids
Glycol-based brake fluids
Atmospheric and ozone agents
Temperature range -25°C/+100°C

DIMENSION - TCZ type NBR

ItemInternal Diameter (d)Outside Diameter (D)Width (b)Total Width (B)Size of Backup Plate (K)
AP1031 EO 2040910.324
AP 1336 EO 2545910.329
AP 1706 FO 3050910.334
AP 2083 EO 3555910.339
AP 3590 EO4062910.344
AP 2666 FO4568910.349
AP 2861 FO 5072910.354
AP 3053 EO5578910.359
AP 3220 EO6082910.364
BP 3054 FO6590910.369

DIMENSION - TCZ type FKM

ItemInternal Diameter (d)Outside Diameter (D)Width (b)Total Width (B)Size of Backup Plate (K)
AP 1031 F0 2040910.324
AP 1336 F0 2545910.329
AP 1706 GO 3050910.334
AP 2083 F0 3555910.339
BP 3590 F0 4053910.344
AP 2666 GO 4568910.349
AP 2861 GO 5072910.354
AP 3053 F0 5578910.359
AP 3220 F0 6082910.367
BP 3054 GO 6590910.369