ODI/OSI
Description
ODI : Designed for smaller section, and able to be fitted into integrated groove.
OSI : Designed for large section, applicable for wide pressure range.
* Retention of oil pressure
Application
None
Materials
Polyurethane (PU)
TECHNICAL DATA
TECHNICAL DATA
| Temperature | -35°C/+100°C |
| Pressure | 0~35 (70with nylon back up) MPa |
| Speed | 0.03~1 m/s |
| Medias | None Mineral hydraulic oils |
MATERIALS
MATERIALS
PU
Polyurethane is a material that has the elastic properties of rubber. The proportion in its composition (diisocyanate, polyol, chain extender) is determined by its properties. This material is characterised by a strong mechanical resistance, good wear resistance, high elastic modulus, good flexibility and a very good ozone and oxidation resistance.
| Chemical resistance | Pure aliphatic hydrocarbons (propane, butane) Mineral oils and greases Silicone oils and greases Water up to +50°C |
|---|---|
| Compatibility issue | Ketones, esters, ethers, alcohols and glycols Hot water, steam, alkalis, amines and acids |
| Temperature range | -30°C/+90°C -30°C / +110°C with our PUHT (short term peak at 150°C) |
DIMENSION
DIMENSION
| Item | Internal Diameter (d) | Outside Diameter (D) | Height (H) |
|---|---|---|---|
| OSW | 40 | 30 | 6 |
| OSW | 45 | 35 | 6 |
| OSW | 50 | 40 | 6 |
| OSW | 55 | 45 | 6 |
| OSW | 60 | 50 | 6 |
| OSW | 63 | 53 | 6 |
| OSW | 65 | 55 | 6 |
| OSW | 70 | 60 | 6 |
| OSW | 75 | 65 | 6 |
| OSW | 80 | 70 | 6 |
| OSW | 85 | 75 | 6 |
| OSW | 90 | 80 | 6 |
| OSW | 100 | 85 | 9 |
| OSW | 105 | 90 | 9 |
| OSW | 110 | 95 | 9 |
| OSW | 115 | 100 | 9 |
| OSW | 120 | 105 | 9 |
| OSW | 120 | 106 | 8.5 |
| OSW | 125 | 110 | 9 |
| OSW | 125 | 112 | 9 |
| OSW | 130 | 115 | 9 |
| OSW | 140 | 125 | 9 |
| OSW | 150 | 135 | 9 |
| OSW | 150 | 136 | 8.5 |