IUH

Description

The IUH is a U-Ring type single acting rod seal with asymmetrical rubber lips.

Application

Material Handling – Lifting
Pressess
Hydraulic Cylinders

Materials

Nitrile rubber (NBR)

TECHNICAL DATA

TECHNICAL DATA

Temperature -25°C/+100°C
Pressure 14 MPa
Speed 1.0 m/s
Medias Mineral hydraulic oils

MATERIALS

NBR

Nitrile rubber (NBR) is the general term for acrylonitrile-butadiene copolymer. The ACN content can vary between 18% and 50%. While the acrylonitrile content is important, the resistance to oil and fuel is more so. Conversely, the elasticity and compression set are not as good. The NBR has good mechanical properties and good wear resistance. However, its resistance to atmospheric agents and the ozone is relatively low.

Chemical resistance Aliphatic hydrocarbons (propane, butane, petroleum, diesel fuel)
Mineral oils and greases
Fire-resistant fluids (HFA, HFB and HFC)
Diluted acids, low-temperature alkaline and saline solutions
Water (up to +100°C max)
Compatibility issue Fuels with high aromatic content
Aromatic hydrocarbons (benzene)
Chlorinated hydrocarbons (trichlorethylene)
Polar solvents (ketone, acetone, acetic acid, ethylene-ester)
Strong acids
Glycol-based brake fluids
Atmospheric and ozone agents
Temperature range -25°C/+100°C

DIMENSION

Internal Diameter (d)Outside Diameter (D)Height (H)
14225
16245
18265
20285
22.4305
25335
2835.55
30406
35456
35.5456
36466
40506
45556
55567
50606
55656
56666
60706
63736
65756
67776
70859
71806
75856
80906
851009
901059
951109
1001159
1051209
1101259
1121258.5
1151309
1201359
1251409
1301459
1351509
1401559
1451609
1501659
1601759
17019012
18020012